Home About Products Blog Contact

Sink Guide

Basin waste and trap types.

Two small fittings that matter more than they look. Here is what each one does.

Quick Answer

Basin waste and trap, briefly.

The waste is the drain fitting at the bottom of the basin. The trap is the curved pipe beneath it that holds a small amount of water to block odours rising back up from the drain.

Bottle trap

A compact, cylindrical trap commonly used with wall-mounted and pedestal basins, easy to access for cleaning.

P-trap / S-trap

Named for their shape, these connect to either a wall or floor waste outlet, chosen based on the existing plumbing layout.

Worth Confirming

Before ordering a basin.

Confirm the trap type your existing plumbing uses with your plumber before choosing a basin, since it affects what fits without additional work.

Waste Types

Slotted and unslotted wastes.

The waste is the drain fitting at the bottom of the basin, and it has to match the basin. Many basins have an overflow, a small channel near the top that lets water escape if the tap is left running. These need a slotted waste, which has openings that connect the overflow to the drain. A basin without an overflow needs an unslotted waste. Fitting the wrong one either blocks the overflow or leaves an unsightly gap, so check which your basin needs. Wastes also come as a fixed grate or a pop-up or push-button type.

Trap Types in Detail

Bottle traps and P or S traps.

A bottle trap is compact and tidy, and it is common with wall-mounted and pedestal basins where the trap is visible or sits close to the wall. A P-trap or S-trap is a curved pipe that connects to a wall or floor outlet, so which you use depends on where your waste pipe comes out. This is a different fitting from the P-trap and S-trap names used for commodes, which describe the direction of the commode's own outlet; see P-trap vs S-trap toilets.

Fitting Considerations

Space, pedestals and appearance.

Check the space beneath the basin. A pedestal basin hides the trap inside the column, so the trap has to fit within it. A wall-mounted basin shows the trap, so a neat finish matters. A countertop basin usually has the trap inside a vanity, where there is more room but you still need to leave space for the pipework and for access. See pedestal vs wall-mounted.

Common Mistakes

Three mistakes worth avoiding.

Ordering the basin without checking where the existing waste comes out. Buying a slotted waste for a basin with no overflow, or the other way round. Choosing a trap that does not fit the space under the basin or inside the pedestal. All three are easy to avoid if you check before you buy. Our basin sizing guide and measuring guide help.

Questions

Common questions.

What is a basin trap?

The curved pipe beneath the basin waste that holds water to block odours rising back up from the drain.

What is the difference between a slotted and an unslotted waste?

A slotted waste has openings that let water from the basin's overflow channel drain away. An unslotted waste is for basins without an overflow.

Do all basins have an overflow?

No. Some have an overflow channel and some do not. Check yours before you choose the waste.

Which trap suits a pedestal basin?

One that fits inside the pedestal column, often a bottle trap. Confirm with your installer before you order.

Is a basin trap the same as a toilet P-trap or S-trap?

No. The names are similar, but a commode's P-trap or S-trap describes the direction of its own outlet, while a basin trap is the curved pipe under the basin.

Have a Question?

Ask us directly.

Enquire on WhatsApp