Home About Products Blog Contact

Practical Guide

Planning a sink and commode together.

The two fixtures interact with each other, not just with the room.

At a glance

Plan them together

Choosing a sink and commode separately, without considering how they sit relative to each other, is a common cause of a cramped-feeling bathroom even when the room itself isn't that small.

Door swing

Confirm the door doesn't clash with either fixture when it opens — a frequently overlooked measurement until the door is actually hung.

Complementary mounting types

A wall-hung commode paired with a wall-mounted sink frees the most combined floor space in a genuinely tight layout.

Related Guides

Plan each fixture in detail.

See our small bathroom sink guide and small bathroom commode guide for fixture-specific advice.

Clearances

Leave room to use the fixtures, not just to fit them.

It is easy to plan a bathroom where everything technically fits but nothing is comfortable. You need room to sit and stand at the commode without touching a wall or the basin, and room to stand squarely at the basin and move around it. A simple way to check is to mark the fixtures on the floor with tape or cardboard cut-outs and stand in the space, before you commit to a layout.

Layout Options

Common layouts.

Placing the sink and commode on the same wall lets them share plumbing, which can simplify the pipework and reduce cost, if the room allows it. Placing them on opposite walls can feel more spacious in a narrow room. Corner placements can use space that would otherwise be wasted. Whatever you choose, check the door swing against every fixture, including with the door fully open.

Plumbing

Work with the plumbing you have.

Keeping fixtures near the existing waste and supply lines keeps cost and complexity down, and moving a waste outlet is the single change most likely to push a budget up. If you are working from scratch, plan the positions with your plumber before the floor and walls are finished. See new build vs renovation.

Ventilation and Light

Ventilation, light and humidity.

In a humid climate, a window or an exhaust fan matters for how the room feels and how long it stays in good condition. Plan lighting and a mirror at the basin so the area is used comfortably. See choosing bathroomware for Sri Lankan homes.

Adding a Bidet

Planning for a standing bidet.

A standing bidet sits beside the commode and needs floor space, its own water supply and its own drain. It is much easier to include in the plan from the start than to add after the floor is finished. See the standing bidet guide. For the commode and the sink individually, see commodes for small bathrooms, sinks for small bathrooms and positioning a commode.

Questions

Common questions.

Should I choose the sink and commode together?

Yes, planning them together avoids a cramped layout that can happen even when the room itself isn't especially small.

What combination saves the most space?

A wall-hung commode paired with a wall-mounted sink generally frees the most combined floor space.

How much space should I leave around a commode?

Enough to sit and stand comfortably without touching a wall or the basin. Mark it out on the floor with tape or cardboard before you decide, and ask your designer or plumber for the clearances that apply.

Should the sink and commode share a wall?

It can reduce plumbing cost and simplify pipework, if the layout works in the room.

How do I avoid the door hitting a fixture?

Check the door swing against each fixture, including with the door fully open, and mock it up on the floor first.

Can I add a standing bidet later?

Only if a water supply and a drain can reach the spot. It is much easier if you plan for it before the floor is finished.

Planning Your Layout?

Send us your measurements.

Enquire on WhatsApp