Home About Products Blog Contact

WC Guide

Commode dimensions: what to measure first.

Three measurements decide whether a toilet fits your bathroom — including how they relate to typical Sri Lankan bathroom sizes. Before measuring, check whether your waste goes into the floor or the wall: see P-trap vs S-trap.

Quick Answer

What to measure before buying a WC.

Three measurements matter: the rough-in distance (from the wall to the waste outlet), the total floor space the toilet and its door swing will need, and the overall bathroom size if you're planning the space from scratch.

Rough-in distance

The distance from the finished wall to the center of the waste outlet. This has to match the toilet you're buying, so it's worth confirming before ordering rather than after.

Bowl height

Comfortable bowl heights are commonly in the range of 15 to 17 inches (about 38 to 43 cm), though this can be adjusted for the household using it.

Clearance around it

Leave enough space on each side and in front of the bowl to sit comfortably and for the door to open without obstruction.

Typical Sri Lankan Bathroom Sizes

Planning around what you actually have.

Bathroom sizes vary a great deal across Sri Lankan homes. The actual space in your home should always be measured directly rather than assumed. In a compact bathroom, a wall-hung toilet can help make better use of the floor — see our wall-hung vs close-coupled comparison for the tradeoffs.

Step by Step

How to measure for a commode.

Work in this order. First, find out where the waste leaves the room, through the floor or through the wall, because that decides which outlet you need; see P-trap vs S-trap. Second, measure the rough-in from the finished wall, which means the tiled wall, to the centre of the waste outlet. If the tiles are not yet fixed, allow for their thickness. Third, measure the width available on each side of the bowl. Fourth, check the space in front, and where the door swings.

Write the numbers down and keep them with you when you choose. Then compare them with the dimensions of the specific commode, not with general figures. The guide to measuring your bathroom covers the rest of the room.

Special Cases

Compact bathrooms, wall-hung and concealed cisterns.

In a compact bathroom, check both the width beside the bowl and the depth in front of it. A wall-hung commode lets you choose the bowl height and leaves the floor clear, while a back-to-wall or close-coupled commode has its own depth to account for. See commodes for small bathrooms.

For a wall-hung commode or a concealed cistern, also check the wall: whether there is room for a frame, and whether the structure can support it. Confirm this with your installer before ordering; see concealed cisterns.

Questions

Common questions.

What is a rough-in distance?

The distance from the finished wall to the center of the waste outlet. It needs to match the toilet you're buying.

How much space does a WC need?

Enough clearance on each side and in front to sit comfortably and for the door to open, in addition to the bowl's own footprint.

What's a typical bathroom size in Sri Lanka?

This varies widely between homes. Always measure your own space directly.

Should I measure the rough-in before or after tiling?

Measure from the finished wall. If the tiles are not yet fixed, allow for their thickness, so the figure matches what the commode will actually sit against.

How do I know whether I need a floor or a wall outlet?

Look at where the waste pipe goes. If it goes down into the floor, you need a floor outlet (S-trap). If it goes back into the wall, you need a wall outlet (P-trap). Your plumber can confirm it quickly.

Do I still need to measure if I am replacing an old commode?

Yes. Measure the existing rough-in and outlet rather than assuming the new commode matches the old one.

Can you help me check my measurements?

Yes. Send us your measurements and the commode you are considering on WhatsApp, and we will help you check the fit.

Planning a New Bathroom?

Send us your measurements.

Enquire on WhatsApp